M812

M812

The heating system adopts high-efficiency and energy-saving Swedish nickel heating wire, which is matched with the curved reflector, with high thermal efficiency and fast temperature rise speed.
Send Inquiry
Product Introduction

M812 Zones Medium Lead-Free Hot Air Reflow Oven

image001


Unique advanced long-life heating system

1. The heating system adopts high-efficiency and energy-saving Swedish nickel heating wire, which is matched with the curved reflector, with high thermal efficiency and fast temperature rise speed. A special forced hot air circulation structure system is made to make PCB and components heat evenly.

2. The insulation system adopts a special high temperature resistant protection system (siser 120kg/ m3 high-density insulation rock wool), which is suitable for lead-free welding.

3. Adopt the design of Taiwan Sanyue long shaft high-temperature fan motor and annular heating wire, and the module design, no noise, no vibration, convenient for maintenance and disassembly.

4. The upper and lower parts of the furnace body are perforated galvanized plates to equalize the air, so as to ensure that the heat can reach the PCB evenly and evenly. The upper furnace body can be opened as a whole, which is convenient for furnace cleaning.


Reliable and stable transmission system

1. The transmission system adopts a bench force speed regulating motor, which is matched with a 1:60 turbine reducer. It operates smoothly, and the speed is 0-1200mm/min stepless adjustable.

2. It adopts independent roller structure and flat support, combined with the supporting stainless steel mesh belt, which runs smoothly and the speed accuracy can reach ± 20mm/min.

3. Stainless steel B-shaped mesh belt is durable and wear-resistant, and it is not easy to change after long-term use.


Stable and reliable electrical control system

1. The temperature control adopts the precise controller of RKC precise control and PID intelligent operation. Through PID intelligent operation, the calorific value is automatically controlled. The fuzzy control function increases the overshoot and suppression function and the function of quickly responding to the change of external heat. The fastest response to the change of external heat and ensure a more balanced temperature through internal control.

2. Taiwan fanda thermocouple is used in each temperature zone to quickly and sensitively sense the changes in each temperature zone, and timely transmit, control and compensate the temperature balance in each temperature zone.

3. The special SSR solid-state relay cooperates with the special radiator to greatly improve the heat dissipation efficiency and effectively extend its service life; Contactless output, safe and reliable. Combined with the unique fuzzy control function of the temperature controller, it constantly monitors the changes of external temperature and heat value, controls the heating device with the minimum pulse, and makes a quick response to ensure high temperature control accuracy, uniform temperature distribution in the machine, and the temperature distribution in the length direction meets the IPC standard.

4. Sufficient power, rapid temperature rise, about 20 minutes from room temperature to constant temperature.

5. With temperature out of tolerance, fault diagnosis, audible and visual alarm.

6. Delayed shutdown protection function, uniform cooling after shutdown to prevent deformation of transmission parts due to uneven cooling.


Technical Parameter

Model

M812

Heating parameters

Number of heating zones

Up 8 down 8

Length of heating zone

2850mm

Heating mode

Hot air

Number of cooling zones

1

Parameters of transmission part

Mesh belt width

350mm

Transportation direction

Left → right

Height of conveyor belt

880±20mm

Transmission mode

Chain+mesh

Belt speed

0-1200mm/min

Electronic speed regulation

Control parameters

Power Supply

5-wire 3-phase 380V 50/60Hz

Starting power

32KW

Power consumption in normal operation

Approx.4KW

Heating time

About 20 minutes

Temperature control range

Room temperature -350 ℃

Temperature control mode

RKC thermostat control +ssr drive

Temperature control accuracy

±1-2℃

PCB temperature distribution deviation

±2-3℃

Abnormal alarm

Abnormal temperature (ultra high temperature after constant temperature)

Body parameters

Overall dimension

L4200×W750×H1350MM

Weight

Approx. 550Kg


Configuration List

Name

Specification and model performance overview

Quantity

Brand

Temperature controller

Temperature control core

16PCS

RKC

Thermocouple

Real time monitoring of temperature in each area

16PCS

Taiwan fanda

Solid state relay SSR

Contactless output, with heat dissipation base, ensuring service life

16 PCS

ANV

High temperature long shaft air motor

Stable air transportation, resistant to 400 ℃

8SET

Taiwan Sanyue

Drive motor

Low noise, stable transmission, supporting 1:150 reducer

1SET

TAI’S

Governor

Electronic speed regulation to control the speed of the conveyor belt

1PCS

TAI’S

AC contactor

Control the on-off of the whole machine

1SET

CHINT

Air switch

Overvoltage, overcurrent and overload protection power off

1SET

CHINT

Relay

My2, MY4 intermediate relay and time relay are used to control the circuit

1SET

OMRON

Tricolor lamp

Explosion proof and temperature resistance

1PCS

Enrong

Cooling fan

1238/1125, ball bearing, long service life, no noise

1SET

LUNXN

Switches and buttons

Control operation

1SET

Schneider


Hot Tags: m812, China m812 manufacturers, supplies, factory, M812, M816, R816, sixteen zone

Send Inquiry

whatsapp

teams

E-mail

Inquiry