The new operating platform VIPSMT for the packaging line is designed to adapt to streamlined production and can be assembled into a U-shaped production unit. After several improvements, it is now close to final shape. After personally operating and observing the workers' work, the following suggestions are proposed for your company's reference: Production line 1 Console design: The feeding table of the assembly console * * layer needs to be raised by 8 centimeters to accommodate screws and nuts. The small material box can be placed next to the table; The corresponding second layer feeding table should also be raised by 8 centimeters. The position of the electric screwdriver should not be placed in the middle of the operating table to hinder the normal operation and material retrieval of the operator. Add a spring to allow it to naturally return to the front right. The space and opening of the garbage bin on the right side of the operating table are too small. The garbage bin can be changed to size H10CM * W20CM * D30CM and can be directly inserted and removed; The diameter of the opening is 10CM. The power and signal wires on the control panel should be routed along the bracket of the control panel and tied neatly. The supplier of the control panel can provide relevant accessories; The position of the power strip needs to be repositioned to ensure that it does not obstruct material retrieval and placement, and to ensure the neatness of the workstation. The empty box placement surface (* bottom layer) should be changed to an outer slope to allow the empty box to slide out automatically. The depth of the test console desktop is~35CM, and it needs to be widened to the same width as the assembly console by 45CM. The packaging console desktop is the same height as other workstations, causing the operator to have to lift their feet for packaging operations. The desktop needs to be lowered by 20 centimeters so that the operator can work at a normal height. The empty box recycling surface on the packaging console desktop should be changed to be the same as the assembly console: the outer slope. The operation consoles of the U-shaped unit line need to be connected to avoid unstable center of gravity of the console. The supplier of this console can provide relevant information. Accessories: The power cord should be led down from the ceiling to the control panel to avoid wiring on the ground Material placement: The incoming materials on the workbench should be placed according to the requirement of working with both hands simultaneously, making it convenient for both hands to work at the same time; At the same time, operators are required to work with both hands. After completing the packaging, the large cardboard box should be placed directly on the pallet to reduce one step of material handling. The material name should be marked on the material box, which should be consistent with the material name on the operation manual Other products and packaging boxes need to be labeled with the same product barcode, but printing the same product barcode on two different plastic films can easily result in missing or labeling two different product barcodes Two identical product barcodes need to be printed on the left and right sides of a plastic film, and any errors can be recognized immediately The pictures on the homework guidebook should be in color for easy identification. The testing position is a bottleneck process that needs to be improved, and the main time is spent on inserting power lines, signal lines, etc., and testing various functions of the product. A clamp fixture can be developed to insert all wire heads at once, and then automatically test, considering parallel testing of several products or continuous uninterrupted testing
Oct 17, 2025
Leave a message
Design and Suggestions for Lean Production Streamlined Production Workbench
Send Inquiry





