Sep 15, 2025 Leave a message

How to deal with the reflective plate of the suction nozzle of the Pic

As we all know, suction nozzles are divided into different specifications according to the type of surface mount machine they belong to, and each specification has its own structural characteristics and the most important component, which is actually the reflector. This machine mainly identifies through the reflective effect of the reflector. If the reflection requirement cannot be met, NOZZLE will trigger an alarm on the machine and cannot be recognized at all. Since reflective panels are so important, how should we handle if the reflective surface is damaged or falls off during installation? What aspects should be paid attention to when carrying out cleaning work?

Precautions for replacement

When holding the CM nozzle, it is important not to touch the reflector with your hands, as the sweat and other substances secreted by your hands can affect the recognition effect.

2. Also, do not let anything else scratch it, otherwise it will cause damage to the reflector, so be especially careful when handling the reflector.

Precautions during maintenance:

1. Those who understand may think that, except for small materials like 0201 (using a dedicated cleaning machine), most of the other materials used only need to be non corrosive solvents. If the solvent comes into contact with the reflective surface for too long during maintenance, it must be wiped clean in a timely manner. Actually, using a dedicated cleaning machine for cleaning is the best option. But in the end, no matter which method is used, try not to damage the reflector as much as possible. Secondly, during our regular maintenance and loading and unloading, we must keep the NOZZLE open, correctly load and unload the suction nozzle, and avoid stacking or touching the reflector. Perhaps there are other ways and methods in the specific operation that we have not summarized yet.

Send Inquiry

whatsapp

teams

E-mail

Inquiry