Accuracy: The difference between the measurement result and the target value. Additive Process: A method of manufacturing PCB conductive wiring by selectively depositing conductive materials (copper, tin, etc.) on the board layer. Adhesion: Similar to the attraction between molecules. Aerosol: Liquid or gas particles small enough to be airborne. Angle of attack: The angle between the surface of the silk screen scraper and the silk screen plane. Anisotropic adhesive: a conductive substance whose particles only pass current in the Z-axis direction. Annular ring: The conductive material around the borehole. Application specific integrated circuit (ASIC): A circuit customized by a customer for a specific purpose. Array: A set of elements, such as tin dots, arranged in rows and columns. Artwork: The conductive wiring diagram of PCB, used to generate the original photo, can be made in any ratio, but is generally 3:1 or 4:1. Automated test equipment (ATE): A device designed to automatically analyze functional or static parameters and also used for fault isolation in order to evaluate performance levels. Automatic optical inspection (AOI): In an automated system, a camera is used to inspect models or objects. Ball grid array (BGA): The packaging form of an integrated circuit, whose input and output points are tin balls arranged in a grid style on the bottom surface of the component. Blind via: The conductive connection between the outer and inner layers of the PCB, which does not continue to the other side of the board. Bond lift off: A fault that separates the solder pins from the surface of the solder pad (circuit board substrate). Bonding agent: An adhesive used to bond a single layer to form a multi-layer board. Bridge: Solder that connects two conductors that should not be conductive, causing a short circuit. Buried via: A conductive connection between two or more inner layers of a PCB (i.e., not visible from the outer layer). CAD/CAM system: Computer aided design is the use of specialized software tools to design printed circuit structures; Computer aided manufacturing transforms this design into actual products. These systems include large-scale memory for data processing and storage, input for design and creation, and output devices for converting stored information into graphics and reports. Capillary action is a natural phenomenon that causes melted solder to flow on solid surfaces in close proximity against gravity. Chip on board (COB): A hybrid technology that uses chip components glued face up, traditionally connected specifically to the circuit board substrate layer through fly wires. Circuit tester: A method of testing PCBs during mass production. Including: needle bed, component pin footprints, guide probes, internal traces, loading board, empty board, and component testing. Cladding: A thin layer of metal foil is bonded onto a PCB layer to form conductive wiring. Coefficient of the thermal expansion: The measured parts per million (ppm) of material expansion per degree of temperature as the surface temperature of the material increases. Cold cleaning is an organic dissolution process that results in the residue after welding is completed by liquid contact. Cold solder joint: A type of solder joint that reflects insufficient wetting, characterized by a gray and porous appearance due to insufficient heating or improper cleaning. Component density: The number of components on the PCB divided by the area of the board. Conductive epoxy: A polymer material that is made by adding metal particles, usually silver, to pass an electric current. Conductive ink: A glue used on thick film materials to form PCB conductive wiring diagrams. Conformal coating: A thin protective coating applied to PCBs that conform to the assembly shape. Copper foil: A negative electrolytic material, a thin, continuous metal foil deposited on the substrate layer of a circuit board, which serves as the conductor of the PCB. It is easy to adhere to the insulation layer, accept printed protective layers, and form circuit patterns after corrosion. Copper mirror test: a corrosion test of soldering flux using a vacuum deposited thin film on a glass plate. Cure: The physical property change of a material through chemical reactions or pressure/non pressure thermal reactions. Cycle rate: A component placement term used to measure the machine speed from picking up, positioning on the board, and returning, also known as testing speed. Data recorder: A device that measures and collects temperature from a thermocouple attached to a PCB at specific time intervals. Defect: A component or circuit unit deviates from its normally accepted characteristics. Delamination: Separation of layers and separation between layers and conductive coatings. Desoldering: Disassemble the welded component for repair or replacement, including using a solder suction tape, vacuum (solder suction tube), and hot pulling. Dewetting: The process of covering and then retracting melted solder, leaving irregular residues. DFM (Design for Manufacturing): A method of producing products in an efficient manner that takes into account time, cost, and available resources. Dispersant: A chemical added to water to increase its ability to remove particles. Documentation: Information about assembly, explaining basic design concepts, types and quantities of components and materials, specialized manufacturing instructions, and new versions. Use three types: prototype and low quantity operation, standard production line and/or production quantity, and government contracts that specify actual graphics. Downtime: The time during which equipment is not producing products due to maintenance or failure. Durometer: measures the rubber or plastic hardness of scraper blades. Environmental test: One or a series of tests used to determine the overall impact of external factors on the structural, mechanical, and functional integrity of a given component packaging or assembly. Eutectic Solders: Two or more metal alloys with extremely low melting points that, when heated, directly transition from solid to liquid state without going through the plastic stage. Fabrication(): The manufacturing process of empty boards after design and before assembly, which includes separate processes such as stacking, metal addition/subtraction, drilling, electroplating, wiring, and cleaning. Fiducial: A specialized marker integrated with circuit wiring diagrams, used in machine vision to identify the direction and position of the wiring diagram. Fillet: A connection formed by soldering between a solder pad and a component pin. That is, solder joints. Fine patch technology (FPT close pitch technology): The center to center distance between the pins of surface mount component packaging is 0.025 "(0.635mm) or less. Fixture: A device that connects a PCB to the center of a processing machine. Flip chip: A pinless structure that typically contains circuit units. Designed for electrical and mechanical connection to a circuit through an appropriate number of tin balls (covered with conductive adhesive) located on its surface. Full liquefied temperature: The temperature level at which the solder reaches a large liquid state, suitable for good wetting. Functional test: Simulate the expected operating environment and test the electrical components of the entire assembly. Golden boy: A component or circuit assembly that has been tested and proven to meet technical specifications, used to compare and test other units. Halides: Compounds containing fluorine, chlorine, bromine, iodine, or astatine. It is the catalyst part in the flux, and due to its corrosiveness, it must be * *. Hard water: Water contains calcium carbonate and other ions that may accumulate on the inner surface of clean equipment and cause blockages. Hardener: A chemical added to a resin to promote early curing, known as a hardener. In circuit test: a component by component test to verify the placement and orientation of components Just in time (JIT): by supplying materials and components directly to the production line before they are put into production, inventory can be reduced to a minimum. Lead configuration: A conductor that extends from a component and serves as both a mechanical and electrical connection point. Line certification: Confirm that the production line sequence is controlled and can produce reliable PCBs as required. Machine vision: One or more cameras used to help locate component centers or improve the precision of component placement in a system. Mean time between failures (MTBF): The average statistical time interval between expected operational unit failures, usually calculated hourly, and the results should indicate actual, expected, or calculated. Non wetting: A situation where solder does not adhere to the metal surface. Due to the contamination of the surface to be welded, the characteristic of non melting and non wetting is the visible exposure of the base metal. Omegameter: An instrument used to measure the residual ion content on the surface of PCB by immersing the assembly in a mixture of alcohol and water with known high resistivity, and then measuring and recording the decrease in resistivity caused by ion residue. Open: Two electrical connection points (pins and pads) become separated, either due to insufficient soldering or poor coplanarity of the connection point pins. Organic activated (OA): A water-soluble soldering system using organic acids as active agents. Packaging density: The number of components (active/passive components, connectors, etc.) placed on the PCB; Expressed as low, medium, or high. Photoplotter: A basic wiring diagram processing device used to produce original PCB wiring diagrams (usually in actual size) on photographic film. Pick and place device: A programmable machine with a robotic arm that picks up components from an automatic feeder, moves them to a designated point on the PCB, and places them in the correct direction and position. Placement equipment: A machine that combines high-speed and accurate positioning to place components onto PCBs, divided into three types: SMD mass transfer, X/Y positioning, and online transfer systems, which can be combined to adapt components to circuit board design. Reflow soldering: The process of placing surface mount components into solder paste through various stages, including preheating, stabilization/drying, reflow peak, and cooling, to achieve * * connection. Repair: The action of restoring the functionality of a defective assembly. Repeatability: The ability to return to the target of a characteristic. An indicator for evaluating processing equipment and its continuity. Rework: Bringing incorrect assembly back to a repetitive process that meets specifications or contractual requirements. Rheology: Describing the flow, viscosity, and surface tension characteristics of liquids, such as solder paste. Saponifier: An aqueous solution of organic or inorganic main components and additives used to promote the * * of rosin and water-soluble soldering flux through methods such as dispersible cleaning agents. Schematic: A diagram that uses symbols to represent circuit layout, including electrical connections, components, and functions. Semi aqueous cleaning: a technology involving solvent cleaning, hot water flushing, and drying cycles. Shadowing: In infrared reflow soldering, the component body blocks energy from certain areas, resulting in insufficient temperature to completely melt the solder paste. Silver chromate test: a qualitative examination of the presence of halide ions in RMA flux. Slump (RMA reliability, maintainability, and availability): The diffusion of solder paste, adhesives, and other materials after template silk screening and before curing. Solder bump: A spherical solder material adhered to the contact area of passive or active components, serving to connect with circuit pads. Solderability: The ability of a conductor (pin, pad, or trace) to melt and become solderable in order to form a strong connection. Solder mask: A processing technique for printed circuit boards, in which all surfaces except for the connection points to be soldered are covered with a plastic coating. Solids: The weight percentage of rosin in the flux formula, Solidus: The temperature at which the solder alloy of some components begins to melt (liquefy). Statistical process control (SPC): Analyzing process outputs using statistical techniques to guide actions, adjust and/or maintain quality control status based on their results. Storage life: The time during which adhesive is stored and remains useful. Subtractive process: Obtaining circuit wiring by removing selected portions of conductive metal foil or cover layer. Surfactant: a chemical added to water to reduce surface tension and improve wetting. Syringe: A container of adhesive that drips out through its narrow opening. Tape and reel: Component packaging for surface mounting, where the components are loaded into grooves on a continuous strip, covered by plastic tape for easy rolling onto a reel for use by the component mounting machine.
Sep 30, 2025
Leave a message
PCBA Terminology Explanation
Send Inquiry





