Aug 03, 2022 Leave a message

Wave soldering temperature test parameters and requirements

If the PCB used for measuring the temperature curve is the prototype board of the product, all the temperatures should be within the range recommended by the flux manufacturer. The ground temperature is 10~15℃ higher than the range recommended by the corresponding flux manufacturer. The so-called sample board, that is, the size of the circular board is too small or the board is too thin to fit or withstand the tester and another selected PCB board.

For products that have SMT components on the solder joint surface and do not need to use a wave soldering mold, the drop between the measured preheating temperature and the highest wave peak temperature before the solder joint surface is immersed in tin is controlled to be less than 150°C. For products using two wave peaks, the drop temperature value between wave peak 1 and wave peak 2: lead-containing control above 170 ℃; lead-free control above 200 ℃ to prevent secondary soldering.

For leaded products after welding, use natural air cooling, for lead-free products after welding, use a refrigeration compressor for forced cooling, cooling requirements after welding: the maximum temperature of the daily measured temperature curve drops to 200 °C The rate of decline is controlled at 8 °C/ S and above. After the PCB board has passed the wave crest for 30 seconds (about the position at the exit of the wave crest), the temperature of the solder joint is controlled below 140°C. The air speed of the cooling air outlet must be controlled at 2.0—4.0M/S. The temperature displayed by the probe of the refrigeration temperature equipment of the refrigeration compressor should be controlled below 15°C.

The following data should be marked in the temperature curve tested by the wave soldering temperature test technician: the standard preheating temperature of the solder joint surface and the maximum preheating temperature before immersion; The slope of the cooling temperature drop.


Send Inquiry

whatsapp

teams

E-mail

Inquiry