SMT surface mount machine is an intelligent precision equipment instrument. It is not only large in size, but also difficult to operate. We do not recommend that you directly use the mobile phone without systematic learning. Due to various unexpected operations during the use of the machine, Beijing Huawei Guochuang Electronic Technology Co., Ltd. now provides several common precautions for operating SMT surface mount machine. 1, Understanding the commonly used instruction labels in machines: There are many labels and instructions in SMT surface mount machines that we need to understand and master, so that we can correctly input the information of the corresponding products that need to be mounted. If we are not familiar with these basic operations, it is quite dangerous to use the machine again, so learning basic operations is a necessary task. Secondly, do a good job of power on inspection: When we start and shut down, we must do sufficient inspection work, such as whether the current machine voltage is the standard voltage (110V for foreign voltage, 220V for domestic voltage) If the voltage does not meet the standard, we need a transformer to change the voltage of the SMT machine, and we also need to pay attention to the startup sequence. Thirdly, we need to do a good job of checking after work: As SMT machines are often used, many components are easily consumable, such as suction nozzles, lenses, lubricants, etc., which are important factors that can easily cause errors in the installation. After using the concentrator again, we need to check these components, replace what needs to be replaced, and wipe what needs to be wiped
Nov 05, 2025
Leave a message
What should be noted when operating SMT surface mount machine
Send Inquiry





