1. Choose the right material and the right method for reflow soldering
Because the selection of materials is very critical, it must be recommended by an authoritative organization, or it must be confirmed to be safe after using it before. There are many factors to consider when selecting materials: such as the type of soldering device, the type of circuit board, and its surface coating condition . As for the correct method, it is necessary to carry out according to your own actual situation, remember not to completely imitate others, because of the different types of components and the distribution and quantity of different components on the board, these need to be carefully studied.
2. Determine the process route and process conditions
This is to develop samples for lead-free soldering. After the material is selected and the method is determined, the test of the welding process can be started, so it cannot be ignored.





