LQFP is a chip specification. The specific description of the entry is as follows: LQFP, also known as Low-profile Quad Flat Package, is a redefinition of the shape specification of QFP made by the Japan Electronics and Machinery Industry Association. According to the thickness of the packaging body, it is classified into three types: QFP(2.0-3.6mm thick), LQFP(1.4mm thick), and TQFP(1.0mm thick).
To determine whether this chip can be attached, two indicators should be used for evaluation: the area of the chip and the density and spacing of the pins. In terms of mounting, parameters such as the visual range, light source, threshold and mounting of the chip are required.
The machine is equipped with a high-definition camera. The maximum diameter of the chip to be mounted is less than 35mm, and the center spacing of the LQFP pins is more than 0.5mm. If all these conditions are met, the machine can complete the mounting requirements. When the machine is mounting, some larger chips need to run at a reduced speed, and the speed of removing and placing chips should also be appropriately lowered.





