1, What is a marker point
Mark points, also known as reference points, provide reference points for the placement of all components in the placement process. Therefore, Mark points are crucial for SMT production.
2, MARK point function and category
MARK point classification:
Single board MARK is required for mounting a single PCB on the PCB board;
Deck MARK is required for mounting PCB boards, usually on the edge of the manufacturing process;
Local MARK is used to improve the accuracy of mounting certain components, such as QFP, BGA, and other packaging;
3, MARK Point Design Specification
All SMT boards must have Mark points, and the relevant SPECs for the Mark points are as follows:
1. Shape
Require Mark points to be marked as solid circles.
2. Composition
A complete MARK point includes: marker points/feature points and open areas.
3. Location
Mark points are located at the relative position of the diagonal of the circuit board and separated as much as possible, preferably distributed at the longest diagonal position. Therefore, MARK points must appear in pairs
4. Size
The minimum diameter for Mark marking is generally 1.0mm, and the maximum diameter is generally 3.0mm
5. Edge distance
The distance between the Mark point and the edge of the printed circuit board must be ≥ 5.0mm (the minimum spacing requirement for machine clamping of the PCB), and must be inside the PCB board rather than at the board edge, and meet the minimum Mark point clearance requirement. Note that the distance referred to is the edge distance, not centered around the MARK point.
6. Open space requirement
There must be an open area around the Mark mark without any other circuit features or markings. The circular radius r of the open area is ≥ 2R, where R is the radius of the MARK point. When r reaches 3R, the machine recognition effect is better.





